9.3 OnPremise Single Server Upgrade Guide for Linux Fall 2018


In this article, we provide step-by-step instructions to upgrade qTest components from 9.1.5 to 9.3 OnPremise on a single CentOS/Ubuntu machine. Please read the instructions thoroughly before starting your upgrade.

To request assistance with upgrading or obtain the self-upgrade links, complete the Upgrade Request Form and reference the OnPremise Upgrades Guide.

Note: If you are performing a fresh install, use the OnPremise New Install Form and reference the OnPremise Install Guide.

About the Command Line Wizard

The qTest 9.3 Command Line Wizard is a command line interface application that allows you to configure basic settings for qTest applications in your purchase package. 

You should understand these Command Line Wizard characteristics before you begin:

  • For each step, the installer will prompt you for a specific input value. After you provide a value, the installer will validate the input. If the value is incorrect, or additional permissions are required, an explicit error message displays so it’s easy to know how the input value should be corrected.
    • Default values display in square brackets [ ]. To use the default value, simply hit the Enter key.
    • Input values for yes/no questions, should be 'y', 'yes','n', 'no' (ignore case sensitive.) Any value other than those listed will be treated as a 'no.'
  • To terminate the configuration at any time without completing it, press Ctrl+C.
    Hint: In the event you cannot start the Command Line Wizard again after terminating the configuration, backup then remove the qtest.config file. Retry to start the Command Line Wizard again.

Known Limitation

  • The Command Line Wizard and qtestctl do not support the character "$". Therefore, a password, username, or any other value that you would enter in a prompt should not contain "$." 
    • qtestctl also does not support any special characters in your Mongo password.

Before You Begin

Read the following:

Please note that the Command Line Wizard will prompt you for each installation instruction. You will need to perform action items and gather specific connection information before you begin the upgrade process.

You will use the same configurations as in your 9.1.5 qtest.config file and can copy those to your new deployment package so they will be your default values in the 9.3 Command Line Wizard.

If you need to change your previous configurations, please review the application checklist provided here so you can see what information you will need.


Make sure the appropriate Ports for the prerequisite applications and qTest applications are open prior to any self/assisted upgrade. You should only open the HTTPS ports if you plan to serve SSL from the application.

Prerequisite Applications

Product  Port
PostgreSQL 5432
Network Drive 2049
MongoDB 27017

Linux non-Docker and Windows

Product HTTP Port HTTPS Port
Manager 8080 8443 
Sessions 9080 9443
Scenario 6080 4443
Insights 10080 10443
Parameters 5080 5080
Pulse 4080 4080
Launch 3080 3080

IMPORTANT: Suggested application ports are listed above, however, you are allowed to use a port of your choosing for the qTest applications you install.

Stop qTest Applications

  1. Access your qTest Manager server.
  2. Log in as root user on your command shell.
  3. Access the installation directory of Manager 9.1.5.
  4. Execute the command below to stop qTest applications.
    # systemctl stop qtest
  5. Remove the qTest service.
    # ./uninstall

Backup qTest Manager, Sessions, and Parameters

  1. Backup your databases following these instructions. 

Download and Start the Installation Package

  1. Request the installation files through the OnPremise Upgrade Form which is also available at the top of this article.
  2. Once the OnPremise Upgrade Form is completed and submitted, the download link will be emailed to you from our Implementation Team.
  3. Access the qTest server.
  4. Log in as a root user on your command shell.
  5. Download and extract the zip file to a folder on disc.
  6. Navigate to the extracted folder at \path\to\qtestctl\
  7. Access the 4.0 deployment folder and copy the qtest.config file from your prior deployment to your new 6.0 deployment package. This will copy your previous values and set them as the displayed default values in the Command Line Wizard.
  8. Run the following command to start the installation:
    path/to/qtestctl>./qtestctl --offline

Note: A default value is provided for each prompt in the square brackets. If you copied your qtest.config file from your previous deployment to your new deployment package, then your previous configurations will be the default values displayed. You can press Enter to use your default values, or input new values and then press Enter.

Choose the Applications to Upgrade

Provide a Yes (y) or No (n) response to the following question. Your response provided here will determine which components are upgraded on this Windows machine.

  • qTest Manager [Y] or [N]
  • qTest Sessions  [Y] or [N]
  • qTest Parameters  [Y] or [N]
  • qTest Insights  [Y] or [N]
  • qTest Launch  [Y] or [N]
  • qTest Pulse  [Y] or [N]
  • qTest Scenario  [Y] or [N] 

Configure Prerequisite Applications

Configure PostgreSQL Database

Review your PostgreSQL Database information you copied from your previous deployment. If you need to enter new values you may do so. You will only need to configure PostgreSQL if you have selected at least one of the following applications:

  • Manager
  • Sessions
  • Insights
  • Launch


Configure MongoDB Database

Review your MongoDB Database information you copied from your previous deployment. If you need to enter new values you may do so. You will only need to configure MongoDB if you have selected at least one of the following applications:

  • Parameters
  • Pulse
  • Scenario


Configure SSL

If you do not want to deploy with SSL, type "n" for Enable secured connection (Y/N) [N]: and move to configuring the qTest applications.


If you do want to deploy with SSL, type "y" for Enable secured connection (Y/N) [N]: and input the path to cert and key files :

  • cert: absolute path to the certificate file on this server. Please use / in the path, recommend copying the path from system file browser. 
  • key: absolute path to the private key file on this server. Please use / in the path, recommend copying the path from system file browser. 
  • passphrase: input passphrase if your key has passphrasewindows-config-ssl.png

Configure qTest Applications

The following applications will be configured using the information you copied from your previous deployment package. The prompt will ask for configuration details based on the applications you chose to upgrade in Step 1.
Example: If you chose to upgrade one application in Step 1, then you will only supply configurations to the Command Line Wizard for that one application on this machine. 

qTest Manager


qTest Sessions

If you want to stores resource files on a local disk enter "1" or "disk_storage" and input the storage location. The location should be an absolute path to the folder. Please use / in the path, recommend copying the path from system file browser.


If you want to store resource files on Amazon s3 enter "2" or "amazon_s3" and input s3 access key, s3 secret key and bucket name:


Note: if you choose to use Amazon S3 as qTest Sessions storage by selecting amazon_s3 for storage type. Refer to this article to learn how to setup Amazon S3 bucket as well to manage access permission.

qTest Insights


qTest Parameters


qTest Launch


qTest Pulse


qTest Scenario


Review the Configuration

After all configurations are entered, they are stored in qtest.config file. You can open the file to review the configuration details.

  • If you need to modify a value, you can re-run the wizard (recommended) or modify the qtest.config file.
  • To restore the default configurations, delete qtest.config and re-run the wizard.


Start the Deployment

To start the deployment, execute this command:

# ./qtestctl --offline start

The command will take control of the terminal. Keep it running.

Build Successful

You will receive a Build Successful message once the upgrade is complete. 

Configure qTest Manager to Connect to qTest Applications

Follow this article to configure qTest Manager to connect with the other qTest applications you installed. You should also verify that the applications can be accessed and working properly before performing the next and final step.

Stop the Running Process

Navigate back to the Command Prompt and stop the running process (Ctrl + C).

Install qTest Applications as a Service

We highly recommend you enable enable qTest applications to automatically start on system startup. For more information on installing qtest service, read the qtestctl as a Service article.

  1. In the Command Prompt, press `Ctrl + C` if qtestctl is running.
  2. Navigate to the folder
  3. Execute the command below to install the new qTest Sessions service.
    C:\qtestctl-6.0> Install.bat
  4. You have now finished upgrading qTest applications.
  5. Access to qTest Sessions and verify the new version.

Migrate Data from Insights to Insights 1.19.1

Stop Insights before performing your data migration.

  1. Navigate to the Root folder of Insights \qtestctl\insights\build\tomcat\webapps\ROOT
  2. Copy the following folders:
    • CustomReports
    • ExecutedReports
    • rdDataCache
    • rdDownload
    • SavedBookmarks
    • SavedDashboards
  3. Move the copied folders to the new location of Insights 1.19.1 at: \qtestctl\insights\build\tomcat\webapps\ROOT

Import qTest License

After the upgrade, you will need to manually copy the qTest License file from Manager 9.1.5 and then import it to 9.3. (These instructions are also covered in the Configure Manager article linked above.)

  1. Access your qTest Manager instance via your browser using the URL as specified in the qtest.config file.
  2. You will be redirected to the Licenses - Users tab in the Site Administration panel.
  3. Select the Import License File button.
  4. Browse to your license file located under the installation directory for qTest Manager v9.1.5:
    Example: <installation_dir>\manager\build\.tc\license.lic
  5. Your license file will import into qTest manager 9.3.


Powered by Zendesk